Advanced Screen - Wetif XT1100 User Manual

Advanced Screen

This screen displays detailed
information on your current
connection and is where you can
adjust advanced settings.
• Wireless mode: You can
configure the type of wireless
mode here. Select either a
single (802.11 A only / 802.11
B only) or mixed (802.11 B/G
mix / 802.11 A/B/G mix)
mode.
• B/G Protection: If the wireless mode you are using is
'mixed', you can select this to enable protection for your
connection. Select from Auto, On, or Off.
• Tx Rate: You can configure the Tx rate for your connection
here. Select from Auto, 1 Mbps, 2 Mbps, 5.5 Mbps, 6
Mbps, or 11 Mbps.
• Tx BURST: Select this option to enable Tx BURST.
• Enable TCP Window Size: Select this option to enable TCP
window size.
• Fast Roaming at ---: Select and enter a power value above
which fast roaming will be enabled.
• Select your Country Region Code: Select your country
region code for this connection. For information on this,
contact your system administrator.
• Enable CCX (Cisco Compatible eXtensions): Select and
configure these settings if you want to connect to a Cisco-
compatible system.
Tap Apply then OK to save all changes.
Note
Should you experience any problems while
attempting to configure a wireless connection,
consult your systems administrator.
XT1100 User Manual
27