Recovering From A System Crash If You Are Using Windows Xp Professional Embedded; Embedded - Wetif XT1100 User Manual

Recovering from a System Crash If you
are using Windows XP Professional

Embedded

In the unlikely event that your XT1100 should crash, do the
following to re-boot your system.
1. Press the power button to turn on the XT1100. During boot-
up, PRESS UP KEY TO RUN RESTORE... is displayed. Press
the up arrow button.
2. The recovery software screen appears with the message
'Are you sure you want to recover the partition now?'.
Press Enter to confirm. The recovery operation starts.
Should you have any further problems, contact technical support
for assistance.
Recovering from a System Crash If you
are using Windows XP Embedded
Note
Follow these steps to perform a recovery procedure using a USB
flash drive should your system crash:
1. Download the FORMATUPD.EXE file to your local drive
(C:\).
2. Connect a USB flash drive to your
computer.
If you are using the Compact Flash memory
card for data storage, your XT1100 will follow
the CF recovery procedures to re-boot your
system.
XT1100 User Manual
11