Download  Print this page

Connecting Via A Wired Lan; Connecting Via A Usb Cable; Connecting Via A Wireless Lan - Canon imageCLASS D570 Getting Started

Hide thumbs

Advertisement

Connecting via a Wired LAN

Checking Before the Setup
Internet
Are the computer and the router (or hub) properly
connected using a LAN cable?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly confi gured, you may not be
able to use the wired LAN connection even after completing
the following settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the "Wired LAN" by default.
• When you connect to a network environment that is not
security protected, your personal information could be
disclosed to third parties. Please use caution.
• If you connect through a LAN in the offi ce, contact your
network administrator.
Connecting via a Wired LAN
1
Connect the LAN cable.
En
The IP address will be automatically confi gured in 2
minutes. If you want to set the IP address manually, see
the following items.
User's Guide "Network" ▶ "Connecting to a Network" ▶
"Setting IP Addresses"
2
Install the driver and software using the provided
DVD-ROM.
See "For details on the installation procedures:" (P.13).
Proceed to "Setting a Paper Size and Type" (P.13).
10
Router
or
hub
LAN cable

Connecting via a USB Cable

Install the Driver and Software
Install the driver and software on the provided DVD-ROM.
See "For details on the installation procedures:" (P.13).
Proceed to "Setting a Paper Size and Type" (P.13).
NOTE
• If you connected the USB cable before installing, fi rst
remove the USB cable and then re-install.
Connecting via a USB Cable
Follow the MF Driver Installation Guide to connect the USB
cable.
Proceed to "Setting a Paper Size and Type" (P.13).

Connecting via a Wireless LAN

Checking Before the Setup
Internet
Is the computer connected to the router (access point)
correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly confi gured, you may not be
able to use the wireless LAN connection even after completing
the following settings.
Wireless LAN Router

Advertisement

Table of Contents

   Related Manuals for Canon imageCLASS D570

Comments to this Manuals

Symbols: 0
Latest comments: