ABB H8137xPx-S Operating Instructions Manual page 32

Fig. 41
Register new ID/IC cards
During the process, the push-button module lights up yellow, swipe the ID/IC cards to register; if
successful, the pushbutton module lights up green.
Delete existing ID/IC cards
During the process, the push-button module flashes yellow, swipe the ID/IC cards to delete; if
successful, the push-button module lights up green.
Delete all existing ID/IC cards
Click to delete all existing ID/IC cards. If successful, the push-button module lights up green.
During the process of card registering or card deletion, the push-button module will light up or
flash. You can press the 1st round push-button to quit the process.
Technical data of ID card
Work frequency
125KHz
Table 7
Technical data of IC card
Designation
Work frequency
Standard
Support card
Output format
Support NFC device
Table 8
Pos: 93 /CNDEX/99 Auxiliary tools/++++++++++++++ page break +++++++++++++++ @ 57\mod_1487814735946_0.docx @ 750979 @ @ 1
Operating Instructions VER:1.0
Standard Support ID card protocol
EM4100, EM4205, EM4305, EM4450, TK4100,
ISO18000-2
T5567/T5577
Value
13.56 MHz
ISO14443A
Mifare One S50/S70, etc.
Wiegand 26/34 bit
Mostly NFC mobile. (Test is required before using)
Operation
│32