Table of Contents
Advertisement
Pos: 42 /CNDEX/01 Heading/1. Heading/Heading_Mounting/Installation @ 56\mod_1487743369641_15.docx @ 749852 @ 1 @ 1
7
Mounting/Installation
Pos: 43 /CNDEX/00 Warning/Warning_Electric voltage_Dangerous currents @ 56\mod_1487741007782_15.docx @ 749637 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
–
–
Pos: 44 /CNDEX/01 Heading/1.1 Heading/Heading_Requirement for electrician @ 56\mod_1487743099110_15.docx @ 749789 @ 2 @ 1
7.1
Requirement for the electrician
Pos: 45 /CNDEX/00 Warning/Warning_Electric voltage_Install the device @ 56\mod_1487743205578_15.docx @ 749810 @ @ 1
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
–
–
The minimum necessary expert knowledge and requirements for the installation
are as follows:
–
–
–
–
Pos: 46 /CNDEX/99 Auxiliary tools/++++++++++++++ page break +++++++++++++++ @ 57\mod_1487814735946_0.docx @ 750979 @ @ 1
Operating Instructions VER:1.0
Disconnect the mains power supply prior to installation and/or disassembly!
Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Incorrect installation endangers your life and that of the user of the electrical
system.
Incorrect installation can cause serious damage to property, e.g. due to fire.
Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
Use suitable personal protective clothing.
Use only suitable tools and measuring devices.
Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).
Mounting/Installation
│12
Advertisement
Table of Contents
