Acer Network Device Altos R520 User Manual page 125

Parameter Description
Resume on Defines the mode of operation if a
AC Power power loss occurs.
Loss
When set to Stay Off, the system
remains off after power shutdown.
When set to Last State, the system
returns to the state it was prior to the
AC power loss.
When set to Reset, the system will turn
on after power is restored.
Clear System Deletes all events in the System Event
Event Log Log.
FRB-2 Enable When Enabled, the BMC (Baseboard
Management Controller) will reset the
system if BIOS does not complete the
POST before the FRB-2 (Fault Resilient
Booting) timer expires.
O/S Boot Enables or disables the BIOS timer. It
Watchdog helps to determine if the OS has
Timer loaded successfully or followed the OS
boot watchdog timer policy.
The BIOS timer can only be shut off
using the management software after
the OS loads.
Console Press Enter to access the Console
Redirection Redirection submenu.
System Press Enter to access the System
Information Information submenu.
115
Option
Stay Off
Last State
Reset
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled