Tips For Safety - Carson Bluster 250se Instruction Manual

Tips for Safety

1. Locate an appropriate location to fly
your helicopter:
R/C helicopters are capable of flying at high speeds, thus
posing a certain degree of potential danger to both the flyer
and bystanders. Try to choose and appropriate flying site where
the surface is flat, smooth, and clear of obstacles. A good
choice would be and empty parking lot free from parked
2. Obtain the assistance of and
experienced pilot.
Prior to turning on your model and transmitter check to make
sure that no one else is operating on the same frequency as
your model. Frequency interference can cause your model to
become uncontrollable as well as other models if they are on
the same frequency. The help of and experienced pilot will
ensure that you will have a well trimmed, correctly functioning
helicopter for the first flight.
3. The same frequency may not be used
in your immediate vicinity.
Please check that no-one is using the same transmission
frequency at the same time in your immediate vicinity otherwise
this may result in you losing control of the helicopter which
could lead to an accident.
CARSON 3D Helicopter Bluster 250se 50 050 7028
cars and pedestrians. An empty gymnasium or warehouse
without obstructions. Do not fly near buildings, trees or high
voltage lines to ensure the safety of yourself and others and
your model. Do not fly your helicopter during inclement weather
such as rain, snow, high winds or darkness.
Anfänger
35.950 MHz
35.950 MHz
Anfänger Experte
5
GB