Power Management System - Planar PT1503Z Manual

Planar User's Manual
Connecting the Optional Touch Screen (optional)
Your LCD Monitor has an optional touch screen feature. If your LCD monitor has this feature, connect the LCD
Monitor's PS/2 connector to your PC's 9-pin RS232 serial port to enable the touch screen.
1. Connect the PS/2 connector to the RS232 cable provided with the optional touch screen
package to the PS/2 Mini-Din port at the back of the LCD Monitor.
2. Connect the 9-pin RS232 connector end of the PS/2 to RS232 cable provided with the op-
tional touch screen package to the 9-pin RS232 serial port at the back of your PC.

Power Management System

The LCD Monitor complies with the VESA DPMS (version 1.0p) power management proposal. The VESA DPMS
proposal provides four phases of power saving modes by detecting the horizontal or vertical sync signal.
When the LCD Monitor is in power saving mode or detects an incorrect timing, the Monitor screen will go blank and
the power LED indicator will start to blink.
6