Planar PT1503Z Manual page 14

Planar User's Manual
The Auto Adjust procedure is activated by pressing the Adjust
Adjust procedure takes approximately 2 seconds to complete. Once finished, the OSD menu will disappear after a short time-out
period.
Pressing the Adjust key on the monitor activates the Monitor-Control submenu. Use the ▲FUNCTION ▼ select buttons to
scroll between the submenu items. You should only use this menu item if the results of the Auto Adjust function are not satisfac-
tory.
H-Position: Press the
V-Position: Press the
Phase: Press the
result in pixel jitter or display noise.
Clock: Press the
result in wide vertical bands on the display.
Reset: Press the Adjust
ues.
8
The OSD-Control option allows you to adjust the position and setting of the monitor's On Screen
Display.
The MISC-Control option allows you to select the desired text language of the OSD, adjust the
monitor speaker volume, and to display the current video information being sent to the monitor
from your video card.
The Graphic-Control option allows you to adjust the display contrast, brightness, sharpness, and
color settings.
The Graph/Tex option allows you to switch DOS text resolution from 640x400 and 720x400. This
function has no effect within graphic operating systems such as MS Windows™.
The OSD Exit option closes the On Screen Display.
Auto Adjust Procedure
The Monitor- Control Option
Adjust buttons to horizontally move the display image to the desired position.
Adjust buttons to vertically move the display image to the desired position.
Adjust buttons to fine-tune the displayed image. An improper phase adjustment will
Adjust buttons to stabilize the display clock timing. An improper clock setting will
button to reset the Monitor-Control submenu values to the factory default val-
key while the Auto Adjust topline menu is selected. The Auto