Use And Operation; Changing The Pressure Unit - vacuubrand DVR 2 Instructions For Use Manual

Use and operation

Display
adjustment mode/
warning symbol automatic sleep mode
pressure units, selectable

Changing the pressure unit

+
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. manual-no.: 999001 / 04/04/2012
page 8 of 17
replace battery/
display of battery capacity
➨ Switch the vacuum gauge off.
➨ Press "MODE" key and keep it pressed while switching the
Torr
DVR 2 on ("ON/OFF" key).
☞ The pressure unit as of the last operation (Torr, mbar or
hPa) is displayed.
➨ Select the desired pressure unit with the " UP / DOWN" key.
mbar
➨ Press "ON/OFF" key to confirm the selected pressure unit
and to terminate the mode.
Keys
ON/OFF key
UP/DOWN key
MODE key
The keys are on the rear side
of the device underneath the
symbols at the front side.