ABB i-bus KNX Product Manual page 3

®
ABB i-bus KNX
Protection
Protection class
Insulation category
Temperature range
Ambient condition
Type, case, design
Installation
Licence
CE marking
Application program
Fan Coil displays controls
adjustments/1.2
© 2009 Busch-Jaeger Elektro GmbH – A Company of the ABB Group
Technology
- "fan stage adjustment"
- °F/°C switching
- IP 20
- III
- overvoltage category III
- pollution severity 2
- Use
- Storage
- Transport
- maximum relative humidity
- Maximum air pressure
- AP device with integrated bus coupler
(no additional supply voltage)
- Dimensions HxWxD
- Colour
- Device labels
- Fire classification V0
- RoHs-compliant and halogen-free
-
monoblock device, bus connection
- surface-mounted installation with holder
(design part)
- KNX acc. to EN 50 090-1, -2
- acc. to EMC and
Low-Voltage Directives
Quantity
Communication objects
47
Note ETS 2 V 1.3 or higher is required for programming.
The application program is in ETS 2 / ETS 3 at ABB/Heating,
Air-conditioning, Ventilation/Thermostat.
Note: The device does not support the close function of a project
or the KNX device in the ETS. If access to all devices of
the project is blocked by a BA password (ETS 2) or a BCU key
(ETS 3), it will not have any effect on this device. It can still
be read and programmed.
When the switch is pressed, the device runs through
the sequence "1
starting from the current fan stage. If the fan is set
to automatic, this is deactivated when the switch
is first pressed and the next fan stage is activated-
This push-switch switches the display between °C
and °F.
Acc. to DIN EN 60529
Acc. to DIN EN 61140
Acc. to DIN EN 60664-1
Acc. to DIN EN 60664-1
- 5°C...+45°C
-25°C...+55°C
-25°C...+70°C
93% non-condensing
equivalent to 2000 m
Case: 81x81x20 mm
Display: 51x39 mm
white, aluminium-silver
function symbols on the case
- ON/OFF
- fan switching
- temperature up
- temperature down
- °F/°C switching
Max. quantity
Group addresses
254
2 3 Auto 0 1 ..."
Max. quantity
Allocations
255
6