Attaching The Storage Basket - Britax Flexx Instruction Manual

TANDEM PACK ASSEMBLY

ATTACHING THE STORAGE BASKET

A When the tandem axle is installed on the stroller, the storage basket must be
increased in size to fit into the basket area under the seat. To enlarge the
storage basket, open all the press studs located around the middle section of
the basket. Position the storage basket into the area under the seat. Slide the
hook tabs at the front of the basket (No. 1) behind the metal bar and attach to
the loop tabs on the basket to secure. Slide the hook tabs on the side of the
basket (No's. 2 & 3) behind the metal bar and attach to the loop tabs on the
basket to secure. Slide the hook tab (No. 4) through the brackets on the inside
of the frame and attach to the loop tabs on the basket to secure.
B Wrap the hook tabs on the rear of the
storage basket around the axle and
attach to the loop tab to secure.
2
1
1
2
3
4
42