Download Print this page
Sony XR-T200 Service Manual
Sony XR-T200 Service Manual

Sony XR-T200 Service Manual

Fm/am cassette
Hide thumbs Also See for XR-T200:

Advertisement

Quick Links

SERVICE MANUAL
• XR-T200 are almost same as XR-1750.
Printed wiring boards, schematic diagram, exploded views
and electrical parts list are described in this service manual.
Please refer to XR-1750 service manual previously issued
for the other informations.
TABLE OF CONTENTS
1.
EXPLODED VIEWS
2.
DIAGRAMS
2-1. IC Pin Function Description ........................................... 6
2-2. Printed Wiring Boards –MAIN Section– ....................... 8
2-3. Schematic Diagram –MAIN Section– ........................... 11
2-4. Printed Wiring Board –CONTROL Section– ................ 15
2-5. Schematic Diagram –CONTROL Section– ................... 17
3.
ELECTRICAL PARTS LIST
MICROFILM
................................................ 2
............................... 19
XR-T200
Saudi Arabia Model
Model Name Using Similar Mechanism
Tape Transport Mechanism Type
SERVICING NOTES
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
FM/AM CASSETTE CAR STEREO
XR-1750
MG-52A-135

Advertisement

loading

Summary of Contents for Sony XR-T200

  • Page 1 Model Name Using Similar Mechanism XR-1750 Tape Transport Mechanism Type MG-52A-135 • XR-T200 are almost same as XR-1750. SERVICING NOTES Printed wiring boards, schematic diagram, exploded views and electrical parts list are described in this service manual. Flexible Circuit Board Repairing Please refer to XR-1750 service manual previously issued •...
  • Page 2: Exploded Views

    SECTION 1 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they may have some difference from the original are seldom required for routine service. Some one. delay should be anticipated when ordering •...
  • Page 3 (2) FRONT PANEL SECTION not supplied PL901 PL902 LCD901 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-009-301-01 BUTTON (BASS) * 63 3-010-282-01 PLATE (LCD), GROUND 3-009-299-01 BUTTON (L) (2) (+.–) * 64 3-012-669-01 SHEET (REFLECTOR) 3-012-576-01 BUTTON (RESET) * 65 3-009-302-01 PLATE (LCD), LIGHT GUIDE...
  • Page 4 (3) MECHANISM DECK SECTION-1 (MG-52A-135) M901 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-928-675-01 BELT (52) 3-933-346-01 CATCHER * 102 3-928-673-01 LEVER (LDG-A) 3-933-344-01 GUIDE (C) 3-928-674-01 LEVER (LDG-B) 3-341-753-11 WASHER, POLYETHYLENE 3-933-341-01 SPRING (LEVER LDG), TENSION 3-933-335-01 GEAR (LDG-FT) 3-928-671-01 HOUSING 3-928-667-01 GEAR (LDG-A)
  • Page 5 (4) MECHANISM DECK SECTION-2 (MG-52A-135) HP901 S901 M902 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3371-710-1 CHASSIS (S) ASSY 3-364-151-01 WASHER 3-933-337-01 SPRING (B-T-R), CONE COIL * 168 X-3371-701-1 CHASSIS (M) SUB ASSY (A) 3-701-437-01 POLY-SLIDER (A) X-3371-707-1 CLUTCH (PLAY) ASSY 3-933-333-01 GEAR (LDG-E) 3-701-437-21 WASHER...
  • Page 6: Ic Pin Function Description

    SECTION 2 DIAGRAMS 2-1. IC PIN FUNCTION DESCRIPTION • MAIN BOARD IC501 µPD17707GC-528-3B9 (SYSTEM CONTROL) Pin No. Pin Name Function – Not used (Fixed at “L”) 2, 3 POS3, POS2 Tape position detection pin 4, 5 POS0, POS1 Tape position detection pin TAPEON Tape power supply control pin CM_ON...
  • Page 7 Pin No. Pin Name Function AMSON At AMS: “L” N_ROUT Forward/reverse control pin TAPMUT Tape muting control pin At muting: “H” Illumination power supply control pin ILLON At PW SEL on: ACC on: “H” At PW SEL off: Power on: “H” SD_IN Station detection signal input pin NOSESW...
  • Page 11: Electrical Parts List

    SECTION 3 CONTROL ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they When indicating parts by reference parts list may be different from the parts speci- are seldom required for routine service. number, please include the board.
  • Page 12 CONTROL MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark SW906 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (–) C153 1-124-463-00 ELECT 0.1uF SW907 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (SEL) C161 1-126-301-11 ELECT SW908 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (+) SW909 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (MUTE) C162 1-126-301-11 ELECT...
  • Page 13 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C500 1-163-038-00 CERAMIC CHIP 0.1uF D505 8-719-991-33 DIODE 1SS133T-77 C501 1-163-227-11 CERAMIC CHIP 10PF 0.5PF D520 8-719-988-62 DIODE 1SS355 C502 1-163-091-00 CERAMIC CHIP 0.5PF D566 8-719-988-62 DIODE 1SS355 C503 1-126-157-11 ELECT 10uF...
  • Page 14 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JC153 1-216-295-11 CONDUCTOR, CHIP (2012) < TRANSISTOR > JC200 1-216-296-00 CONDUCTOR, CHIP (3216) JC201 1-216-296-00 CONDUCTOR, CHIP (3216) 8-729-900-53 TRANSISTOR DTC114EK JC202 1-216-296-00 CONDUCTOR, CHIP (3216) 8-729-620-06 TRANSISTOR 2SC3052-EF JC253 1-216-295-11 CONDUCTOR, CHIP (2012) 8-729-027-23 TRANSISTOR DTA114EKA-T146...
  • Page 15 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R121 1-249-418-11 CARBON 1.2K 1/4W R512 1-216-097-00 METAL CHIP 100K 1/10W R152 1-216-077-00 METAL CHIP 1/10W R515 1-216-097-00 METAL CHIP 100K 1/10W R516 1-249-441-11 CARBON 100K 1/4W R161 1-216-063-00 METAL CHIP 3.9K...
  • Page 16 XR-T200 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R713 1-216-689-11 METAL CHIP 0.5% 1/10W R736 1-216-296-00 CONDUCTOR, CHIP (3216) PARTS FOR INSTALLATION AND CONNECTIONS *************************************** R775 1-216-295-11 CONDUCTOR, CHIP (2012) R851 1-247-807-31 CARBON 1/4W...
  • Page 17 XR-T200 Saudi Arabia Model SERVICE MANUAL SUPPLEMENT-1 File this supplement with the service manual. Subject : Changed Mechanism Deck (ECN-CS703771) The type of mechanism deck was changed from MG-52A-135 to MG-25E-136 on the way of production. When servicing the new type of mechanism deck, refer to this service manual supplement-1.
  • Page 18: Assembly Of Mechanism Deck

    ASSEMBLY OF MECHANISM DECK Note : Follow the assembly procedure in the numerical order given. HOUSING 7 Holder the hanger by bending the claw. 5 Fit projection on C part. 1 Install the catcher to the hanger. 2 Install the hanger onto two claws of the housing.
  • Page 19 LEVER (LDG-A) / (LDG-B) shaft A shaft A shaft B shaft B shaft C 1 Fit the lever (LDG-A) on 3 type-E stop ring 2.0 shafts A – C and install it. 2 Fit the lever (LDG-B) on shafts A and B and install it.
  • Page 20 GUIDE (C) 2 guide (C) 1 three claws MOUNTING POSITION OF CAPSTAN/REEL MOTOR (M901) 1 precision screws +P 2x2 capstan/ reel motor 30˚ – 4 –...
  • Page 21 MECHANISM DECK SECTION (MG-25E-136) HP901 M901 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3291-667-A CLUTCH (FR) ASSY 3-933-344-01 GUIDE (C) 3-019-130-01 LEVER (LDG-A) 3-014-798-01 SCREW (HEAD), SPECIAL 3-019-131-01 LEVER (LDG-B) 3-364-151-01 WASHER 3-020-539-01 SPRING (LD-1), TENSION X-3375-625-1 CHASSIS (SV) ASSY (D) 3-020-540-01 SPRING (LD-2), TENSION 3-017-302-01 BELT (25)
  • Page 22 XR-T200 Sony Corporation 99A04054-1 9-925-651-81 Personal & Mobile Communication Company Printed in Japan C1999. 1 – 6 – Published by Quality Assurance Dept.