Advertisement
Advertisement
Table of Contents
Related Manuals for ProAudio PAW10.1
Summary of Contents for ProAudio PAW10.1
- Page 1 PAW10.1 10" 26cm 8Ohm Midrange Bass Woofer Single 200w RMS Instruction manual...
- Page 2 Thank you for choosing Bassface. From the simplest connector to our top of the range amplifier - every element of these products has been designed to give you the best possible performance for your money. Please take the time to read these instructions carefully as they contain useful and important information.
- Page 3 to allow operation of the vehicle windows or other functions you may need to make or obtain spacer rings to move the unit forwards. You need to ensure that the cone and surround will not touch anything during playback. Remember that the cone will move a good few mm forwards during operation.
- Page 4 When you look to tune the crossover frequency we would advise that you start with around a 5Khz high pass roll off to the tweeters. This is an excellent starting point. Depending on the location of the tweeters and the type of the tweeters you may be able to run a lower crossover point, which will enable more of the sound to come out of the tweeters and often this creates a better sound image, as well as tightening up the midbass.
Need help?
Do you have a question about the PAW10.1 and is the answer not in the manual?
Questions and answers