Vision GS8510 Series User Manual page 8

3.1.3
1.
amended, press „ to choose the amend place, push ▲\
+\-1, press
exit.
For example, amend IP setup menu, IP: 192.168.000.015; if change 5 to 6,
use
6, then press
2.
The default control way is AGC. That is, when you use
the menu to the modulation control way, it shows: RF Mode = AGC.
At this time, when you press
press
▼
switch from the AGC to MGC is done.
If you want to re-switch the modulation control way to the AGC, just press
then click
Page 6 of 7
Menu #21 - IP
Adjustable list, displays the IP address of SNMP
Menu #22 - Sub
Adjustable list, displays the address of net mask
Menu #23 - GW
Adjustable list, displays the gateway address of SNMP
Menu #24 - TR1
Adjustable list, displays the TRAP1 address of SNMP
Menu #25 - TR2
Adjustable list, displays the TRAP2 address of SNMP
Menu assistant manual
Press up/down key to amend the IP address menu that should be
to enter into save and
key to choose the place of 5, then press ▲ key to change 5 to
to save amended IP:192.168.000.016
The manual for the control way of RF modulation
or ▲, it shows: RF Mode = MGC, press
when the menu shows RF Mode = MGC, it will show RF Mode =
▼ or ▲, Press the
, it shows: RF Mode =
to save, it shows: RF Mode = AGC.
currently value
▼
or ▲ to switch
▼
; when you
to save, then the
,