Related Manuals for Vision TC-HDMIIPTX
Summary of Contents for Vision TC-HDMIIPTX
-
Page 1: Owners Manual
TECHCONNECT TC-HDMIIP OWNERS MANUAL www.visionaudiovisual.com/techconnect/tc-hdmiip TC-HDMIIP_manual_en.doc... -
Page 2: Declaration Of Conformity
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park, Clifton Moor, York, YO30 4GH. -
Page 3: Place Of Installation
WARNING SIGNS If you detect an abnormal smell or smoke, turn this product off immediately and unplug the power cord. Contact your reseller or Vision. PACKAGING Save all packing material. It is essential for shipping in the event the unit ever needs repair. - Page 4 OVERVIEW This product converts HDMI signal into native ethernet signal and allows the signal to be routed through a normal local area network. It extends image and audio. TRANSMITTER 5V 2A Power input Power LED (requires external power supplies at both ends, does not work with PoE) CAT5e/6 Output Data Transmission LED Link LED (if this is not lighting check ethernet cable)
- Page 5 RECEIVER 5V 2A Power input Power LED (requires external power supplies at both ends, does not work with PoE) CAT5e/6 Input Data Transmission LED (slow flashing means connecting, fast flashing shows data transfer) Link LED (if this is not lighting check ethernet cable) Reset Button HDMI Output to display IR blaster 3.5mm Minijack socket...
-
Page 6: Installation
INSTALLATION The transmitters and receivers are plug and play. Diagnosis is done via the status lights on the devices. There is no online device management with this product. 1.1 CONNECT DIRECTLY. Use CAT6 cable up to 150 metres (4 ft) long. With very high quality cable 150 m (492 ft) is possible. -
Page 7: Multiple Transmitters
1.3 CONNECT VIA NETWORK – MULTICASTING (DISTRIBUTION). All receivers will display the same image and audio. NOTE: Multicasting uses more bandwidth. Vision recommends using a standalone Gigabit switch. It can be an unmanaged switch since IGMP snooping DOES NOT need to be activated. -
Page 8: Troubleshooting
TROUBLESHOOTING If your system is not operating properly, please refer to the following information. If the problem persists, disconnect from power and contact your AV reseller immediately. Problem Correction No light • Check network cable Network cable is too long •... -
Page 9: Specifications
SPECIFICATIONS TRANSMITTER DIMENSIONS: 97 x 94 x 24 mm / 3.82″ x 3.70″ x 0.94″ (length x width x height) RECEIVER DIMENSIONS: as above PACKAGED DIMENSIONS: 150 x 117 x 77 mm / 5.90″ x 4.60″ x 3.03″ PRODUCT WEIGHT: 0.145 kg / 0.31 lb per set PACKAGED WEIGHT: 0.35 kg / 0.77 lb per set CONSTRUCTION MATERIAL: Metal COLOUR: White... - Page 10 Some Vision products are very technical and require troubleshooting all elements of the installation as it may not be the Vision product at fault. Because of this the manufacturer may refuse to replace the item if an adequate description is not provided.
- Page 11 The user has is taking unfair advantage of this service • The manufacturer will pre-qualify the visit to ensure the fault relates to the Vision product. The engineer visits are timed to ensure you are onsite and the room is accessible. A revisit WILL NOT be provided if access to the room is not provided at the arranged time.