1.0 PRODUCT SUMMARIZE We are the well-known manufacture in analog externally modulated optical transmitter in the world. GS8510, a kind of low cost 1550nm Externally Modulated Optical transmitter, is specially designed for networking application of second-grade service area. It is named as GS8510 second-grade service area 1550nm Externally Modulated Optical Transmitter.
the equipment should keep the suitable temperature & humidity in the restrained scope. We recommend to operating in the environment without dust. 3. The equipment can be powered by AC or steady voltage DC. In both of AC & DC, AC is the chief power supply. Request of power supply: AC input 94-245VAC, 50-60Hz...
Page 5
- Compressed air may be used to clean fiber bulkhead connectors. Use compressed air according to the following specifications at least: - Non-residue, inert gas for precision dust removal - Ultra-filtered to < 0.2 microns - Recommended for optical systems - Using compressed air as listed above, remove the bulkhead dust cover and hold the can of compressed air about 6 inches away from the connector.
This section of the manual will give an overview of the available menus in the GS8510 series transmitter. All instructions in Section 3.0 refer to the representation f the front panel shown in the diagram below. The user can scroll through the menus by using the push buttons that are on the front panel and are located in the right of the LCD screen.
Page 7
Read-only menu, tells the optical power out of port 1 Menu #5 - LD S/N Read-only menu, tells laser serial-number Menu #6 - Laser Current Read-only menu, tells laser current Menu #7 - Laser TEMP Read-only menu, tells the laser temperature Menu #8 - TEC Current Read-only menu, tells the TEC current...
Page 8
Menu #21 - IP Adjustable list, displays the IP address of SNMP Menu #22 - Sub Adjustable list, displays the address of net mask Menu #23 - GW Adjustable list, displays the gateway address of SNMP Menu #24 - TR1 Adjustable list, displays the TRAP1 address of SNMP Menu #25 - TR2 Adjustable list, displays the TRAP2 address of SNMP...
3. Lifelong maintain and upgrade can be provided even though the guarantee period is expired. 4. If component is damaged by man-induced factor, material fee will be charged. Contact Vision’s Partner: xbest.pl Sp. z o.o. Sp. Komandytowa ul. Sw. Jozefa 141D, 44-200 Rybnik, Poland tel. (+48) 32-7006900 fax.