Vision GS8510 Series User Manual page 7

Read-only menu, tells the optical power out of port 1
Menu #5 - LD S/N
Read-only menu, tells laser serial-number
Menu #6 - Laser Current
Read-only menu, tells laser current
Menu #7 - Laser TEMP
Read-only menu, tells the laser temperature
Menu #8 - TEC Current
Read-only menu, tells the TEC current
Menu #9 - RF Mode
Current RF mode, display AGC/MGC
If it appears RF Mode = AGC, it was in the state of AGC
If it appears RF Mode = MGC, it was in the state of MGC
Menu #10 - OMI Adjust
OMI adjustable, the range is betweent -7.3dBm~+7.3dBm, step
0.3/0.2 dBm
Menu #11 - RF Level
Read-only menu, displays RF level and shows LOW/NORMAL/HIGH
Menu #12 - SBS
SBS restrain, 135/16/18dBm optional
Menu #13 - SBS State
Read-only menu, tells the situation of SBS
Menu #14 - CSO State
Read-only menu, tells the situation of CSO
Menu #15 - Date
Read-only menu, tells the date
Menu #16 - Version
Read-only menu, tells the version
Menu #17 - System TEMP
Read-only menu, tells the system temperature
Menu #18 - +5V Monitor
Read-only list, displays the voltage +5V
Menu #19 - -5V Monitor
Read-only list, displays the voltage -5V
Menu #20 - +24V Monitor
Read-only list, displays the voltage +24V
Page 5 of 7