Rome Specifications - Wave2wave Rome500 Hardware Installation Manual

Specifications
Optical Characteristics
Fiber
Configurations Available
Wavelength Operating Range
Insertion Loss
Return Loss
Switching Time
Power Requirements
Power Supply Options
LCU Power Consumption
Environmental Conditions
Temperature Range (operating)
Temperature Range (storage)
Relative Humidity (non-condensing)
Chassis Physical Characteristics
Required Rack Space
Ground Clearance
Front Clearance
Dimensions
Mounting Rail Distance
Weight
LCU Physical Characteristics
Required Rack Space
Dimensions
Mounting Rail Distance
Weight
Interfaces
Software
Hardware
Patch Panel Dimensions
Dimensions
Page 20
Appendix 5 - ROME Specifications
ROME® 250
256 Fibers
Duplex (East and West)
Duplex Tandem (Any to Any connection within Alpha and Beta Matrix)
Simplex Tandem (Any to Any connection within Alpha and Beta Matrix)
1260 to 1625 nm for SMF, 850 to 1300 nm for MMF
1.0 dB Max (Patch panel to patch panel)
-50 dB Single-Mode UPC, -25 dB Multi-Mode PC
25 sec (Typical)
AC/DC Redundant/Hot Swappable
100-240 V; 50/60 Hz 4A per input, -48/-60 Vdc, 8A per input
(ROME Chassis powered by LCU)
0 °C to 40 °C (32 °F to 104 °F)
-40 °C to 70 °C (-40 °F to 158 °F)
5% to 95%
10RU
Minimum 12" (305mm) from Rack Floor to Bottom of the ROME®
Minimum 30" (762mm) from Front of Rack
17.42" (442.50mm) Width, 17.45" (443.30mm) Height, 31.14" (791mm) Depth
35.22" (894.59mm) to 42.52" (1080.01mm)
ROME 165 lbs (75kg), ROME + Patch panels/cabling 191.81 lbs (87kg)
1RU
17.48" (444mm) Width, 1.73" (44mm) Height, 27.49" (698.25mm) Depth
35.22" (894.59mm) to 42.52" (1080.01mm)
30 lbs (13.5 kg)
CLI
RJ45 (console or LAN)
19" Rack Mount: 6"(153.6mm) Width x 15.6"(398mm) Height
www.wave-2-wave.com
Hardware
Installation Manual
ROME® 500
512 Fibers
DOC-0001