Indicator Instruction - SCC MAM – 890 Operation Manual

Move down button / Decreasing button:

When viewing the menu, press this button to move downward the cursor

When modifying data, press this button to decrease the data at current position
Move up button/Increasing button:

When viewing the menu, press this button to move upward the cursor

When modifying data, press this button to increase the data at current position
Shift button /Enter button:

When modifying data, press this button to move to the next data bi

When select menu, press this button to switch to submenu. If no submenu available, the controller will
shift to data setting mode
Return button / Reset button:

When modifying data, press this button to exist data setting mode

When viewing the menu, press this button to return to previous-menu
When the controller is at failure stop status, long press this button to reset


1.2 Indicator Instruction

Power Indicator：
Run indicator：
Alarm indicator：
04.08.2017
Indicator on when controller is energized
Indicator is on when motor is running
Indicator is blinking when alarming; indicator on when fail to stop; indicator off when error
is cleared
Operation Manual MAM - 890 V1.0
-
5 -