Assembly And Use For The Nutri Ninja Cup - Ninja BL780 Owner's Manual

Assembly and Use for the 72 oz. Pitcher - cont.
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the cup to be damaged or to
shatter, which may cause personal injury.
CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp.
CAUTION: Do not blend hot liquids.
IMPORTANT: Make sure that the motor base is plugged in for use.
USE
Fig. 6 Fig. 7
9 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
10 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
11 To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counterclockwise and then lift off the
base. (Fig. 7, Fig. 8)
CAUTION: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
7 1-877-646-5288
REMOVAL
Fig. 9
Fig. 8
12 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents. For thicker consistencies,
remove the lid and Stacked Blade Assembly carefully
(by its shaft), then empty contents from the container.
CAUTION: Stacked Blade Assembly is not locked in
place and is removable. If using the pour spout,
ensure the lid is fully locked onto the blender pitcher.
13 For thicker consistencies, remove the lid and Stacked
Blade Assembly carefully (by its shaft), then empty
contents from the container. To remove the lid, press
the release button on the lid and pull the lid handle up
to a 90° angle and lift the lid off the blender pitcher.
CAUTION: Stacked Blade Assembly is not locked in
place and is removable. If pouring with the lid removed,
ALWAYS remove the Stacked Blade Assembly first.
14 Make sure that the unit is unplugged when not in use.
15 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 9)
Assembly and Use for the Nutri Ninja
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the container to be damaged
or to shatter, which may cause personal injury.
CAUTION: Handle the Nutri Ninja Blade Assembly with care, as the blades are very sharp.
CAUTION: Do not blend hot liquids.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2 Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Add ingredients to the Nutri Ninja cup.
3 Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
4 Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2) Turn the power button on, the Single
Serve button will illuminate.
5 Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
6 Once you have reached your desired consistency, turn
the power button off. Turn the Nutri Ninja cup counter
clockwise and pull straight up to remove. (Fig. 4, Fig. 5)
Cup
®
USE REMOVAL
Fig. 4 Fig. 5
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
7 Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly clockwise.
8 Place the To-Go drinking lid onto the Nutri Ninja cup,
twist to seal and enjoy!
9 Make sure that the motor base is unplugged when not
in use.
10 To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you. (Fig. 6)
NOTE: To order additional Nutri
Ninja Cups, please visit our website:
www.ninjakitchen.com or feel free to
contact customer service: 1-877-646-5288.
www.ninjakitchen.com
Fig. 6
8