Using The Ninja Supra Kitchen System; Assembly And Use For The 72 Oz. Pitcher; Before First Use - Ninja BL780 Owner's Manual

Using the Ninja Supra Kitchen System
®
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
WARNING: Secure the appliance while in use
by pressing down on the lid with one hand.
CAUTION: Blade assemblies are sharp, not
locked in place and removable, handle with
care. When handling the blade assemblies,
always hold them by the shaft.
CAUTION: Do not blend hot liquids.
CAUTION: Never remove the container while
the appliance is still running.
CAUTION: We do not recommend grinding in
any of our Nutri Ninja ® Cups.
IMPORTANT: Never add ingredients into the
container before placing the attachment in
first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
5 1-877-646-5288
CAUTION: Blade
Assemblies are not
locked in place and
are removable. If
using the pour spout,
ensure the lid is
fully locked onto the
blender pitcher.
CAUTION: Blade
Assemblies are not
locked in place and
are removable. If
pouring with the lid
removed, ALWAYS
remove the Blade
Assembly first.
CAUTION: Blade assemblies are sharp, not locked
in place and removable, handle with care. When
handling the blade assemblies, always hold them
by the shaft.

BEFORE FIRST USE

1
Remove all packaging material and labels from the
appliance.
2
Wash the lids, pitcher, bowl, Nutri Ninja cups and blade
assemblies in warm, soapy water with a soft cloth.
CAUTION: Handle the blade assemblies with care
when washing, as the blades are very sharp.
3
Rinse and dry thoroughly.
4 The pitcher, bowl, Nutri Ninja cups, lids and blade
assemblies, are all dishwasher safe. It is recommended
that the lids and blade assemblies be placed on the top
rack. Ensure that the blade assemblies are removed
from the containers before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.

Assembly and Use for the 72 oz. Pitcher

WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the container to be damaged
or to shatter, which may cause personal injury.
CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp.
CAUTION: Do not blend hot liquids.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 3b
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the right of
the "LOCK" symbol on the motor base.
3 Rotate the pitcher clockwise until it locks in place. You
will hear a click when the lock is engaged. (Fig. 2)
4 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5
Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
6 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
Fig. 2 Fig. 3a
Fig. 4
Fig. 5
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
"Max liquid" mark (1.9 L) on the pitcher
7
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the pitcher and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
8
Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow ( )
located on the lid with the arrow ( ) located on the
pitcher's handle. (Fig. 5) Press the handle down until
you hear a click.
www.ninjakitchen.com 6