Wire Installation
1
Drill one 1" hole and one 1
indicated. The forward hole can be drilled on the left or right.
2
Run cable into the
plug just in front of the
transducer scupper.
3
Lead the cable through the inside
of the hull and exit the cable
through the 3-way Thru-Hull Plug.
Hand tighten screws to avoid
stripping threads.
Lowrance Ready Option
" hole using a hole saw in the areas
3/8
Choice for Hole #2
1
" Left or right
3/8
Hole #1
1"
hobie.com
17