Table of Contents
Advertisement
SD Data Card to PC Data Transfer
1.
Complete a datalogging session as detailed above in the previous sections. Hint: For the
first few tests, simply record a small amount of test data. This is to ensure that the
datalogging process is well understood before committing to critical, large scale
datalogging.
2.
With the meter switched OFF, remove the SD Card.
3.
Plug the SD Card directly into a PC SD card reader. If the PC does not have an SD card slot,
use an SD card adaptor (available at most outlets where computer accessories are sold).
4.
Power the PC and run a spreadsheet software program. Open the saved documents in the
spreadsheet software program (see example spreadsheet data screen below).
AC Power Adaptor
This meter is normally powered by six (6) 1.5V 'AA' batteries. An optional 9V power adaptor is
available. When the adaptor is used, the meter is permanently powered and the power button
will be disabled.
Spreadsheet data example
8
SDL730-en-GB_V1.0 12/16
Advertisement
Table of Contents
Need help?
Do you have a question about the SDL730 and is the answer not in the manual?
Questions and answers