Dell OptiPlex 5050 Owner's Manual page 48

Table 6. System Configuration
Option
Integrated NIC
SATA Operation
Serial Port
Drives
Smart Reporting
USB Configuration
Front USB Configuration
Rear USB Configuration
USB PowerShare
Audio
Miscellaneous
48 System setup
Description
Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not
selected by default. The options are:
• Disabled
• Enabled
• Enabled w/PXE
NOTE: Depending on the computer and its installed devices, the items listed in this section
may or may not appear.
Allows you to configure the operating mode of the integrated hard drive controller.
• Disabled = The SATA controllers are hidden
• RAID ON = SATA is configured to support RAID mode
• AHCI= SATA is configured for AHCI mode
Allows you to determine how the built-in serial port to operate. The options are:
• Disabled
• COM 1
• COM 2
• COM 3
• COM 4
Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-2
• SATA-4
• M.2 PCIe SSD-0
This field controls whether hard drive errors for integrated drives are reported during system startup.
The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
• Enable Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports
Allows you to enable or disable the front USB ports. All the ports are enabled by default.
Allows you to enable or disable the back USB ports. All the ports are enabled by default.
This option allows you to charge the external devices, such as mobile phones, music player. This
option is not selected by default.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by
default.
• Enable Microphone
• Enable Internal Speaker
Allows you to enable or disable the various on-board devices.
• Enable Media Card