Installing The Bezel; Speaker; Removing Speaker - Dell OptiPlex 5050 Owner's Manual

Installing the bezel

1 Insert the tabs on the bezel into the slots on the computer.
2 Press the bezel until the tabs clicks into place.
3 Install the cover.
4 Follow the procedure in

Speaker

Removing speaker

1 Follow the procedure in
2 Remove the:
a cover
b bezel
c 2.5–inch drive assembly
d optical drive
3 To remove the speaker:
a Disconnect the speaker cable from the system board [1].
b Press the release tabs and pull the speaker out from the computer [2] [3].
After working inside your computer
Before working inside your computer.
Removing and installing components 13