Display; Security Settings; Message; Read Message - Vogtec D379H User Manual

Power management
To display the battery remains.

Display

Idle display settings Set on/off for displaying Time & date
Backlight
on,20 seconds on,30 seconds on.
Auto Keypad Lock

Security settings

The phone will prompt for the phone code, the default code is 1234.
Power on PIN1 Set to On to enable the PIN1 code entry of your SIM before the phone proceeds to turn on. You
can also select Change PIN1 to change the PIN1 code.
Phone lock Set to On to enable the phone code entry before the phone proceeds to turn on, otherwise set to
Off. The default phone code is 0000.
Profiles
The phone can set for different status.
Connections
The phone can set network connection method. This function need set with SIM card.

Message

Read message

When receiving a text message, a message alert will be heard. Press MESSAGE key or Select and then Read to
open the message.
Reading a Text message: Open the Short message>Inbox folder. The message lists will display starting from the
Unread or most recently viewed. Select the message in the list and then press Accept key to read the content.
From the SMS message read view, press Option to do the following:
Delete Deletes the current message.
Reply Opens the Message reply the message to sender.
Forward Forwards the message to other contacts.

Write message

Before you start, make sure that the number of the service center is set. The number is supplied by the service
provider and is usually saved on the SIM card.
Select the backlight of the LCD to ： Always on,5 seconds on,10 seconds on,15 seconds
Set the locking behavior of the keypad to：Off, 30 Seconds, or 1 min.
11