Playing Sources With Dolby Digital Sound - Pioneer VSX-D498 Operating Instructions Manual

Sound Modes

Playing Sources with Dolby Digital Sound

SOURCE
SELECT
CHANNEL
CD STANDBY/ON STATION
TV FUNC. TV VOL.
TAPE BAND FREQ.
DIRECT
TUNER MPX CLASS .ACCESS
DVD
1 2
LD
4 5
TV
TEST TONE
CONTROL
7 8
SURROUND ATT.
CD DISC
0
FUNCTION DSP MODE MUTING
3
CHANNEL
SELECT LEVEL
RECEIVER MASTER
STANDBY/ON EFFECT VOLUME
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
memo
When playing LD recorded in Dolby Digital
When connecting a DVD/LD player or LD player using the AC-3 RF output, a commercially available RF demodulator
(RFD-1) is required. The RF demodulator changes the RF signal to a digital signal which is then processed by the
receiver at the digital input jacks. For more details, refer to the instruction manual supplied with the RFD-1.
Refer to pages 43 for explanations Dolby Digital, Dolby Pro Logic.
28
<ARB7192>
1
Follow steps 1 to 3 of the playback procedure. (Refer to
"Playback" on page 27.)
1 Turn on the power of the playback component.
2 Press RECEIVER
3
3 Press FUNCTION to select the source component you want to play.
6
9
2
Press SIGNAL SELECT on the front panel to select
DIGITAL.
(Refer to "Switching ANALOG/DIGITAL signal input" on the previous
5
page.)
Î
3
Press
4
Start playback of the component you selected in step 1.
5
Press VOL (+/–) to adjust the volume level.
3
2 5
STADBY/ON to turn on the receiver.
to switch the Dolby Surround mode on.