Playing Sources With Dolby Digital Or Dts Sound - Pioneer VSX-D908S Operating Instructions Manual

Playing Sources with Dolby Digital or DTS Sound

The following instructions show you how to play Dolby Digital or DTS sound sources with the VSX-D908S.
Î
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TV CONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3 8
- + - +
TUNING STATION
1 ¡ 4 ¢
- +
DTV ON/OFF DTV MENU CHANNEL
2 3
1
4 5 6
8 9
7
GUIDE EXIT
0 ENTER
+10 DISC
TV
TV VOL VOLUME
TV CONTROL
TV FUNC
EFFECT
MENU MUTE
/CH SEL
FUNCTION
ENTER
SIGNAL
SELECT
2/dts
SYSTEM
ADVANCED STANDARD
SETUP
REMOTE
MIDNIGHT DSP STEREO
SETUP
DIGITAL NR
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
1 3
4
When playing LD recorded in Dolby Digital
When connecting a DVD/LD player or LD player using the AC-3 RF output, a commercially available RF
demodulator (RFD-1) is required. The RF demodulator changes the RF signal to a digital signal which is
then processed by the receiver at the digital input jacks. For more details, refer to the instruction
manual supplied with the RFD-1 (See p.11).
Refer to pages 77, 78 for explanations of Dolby Digital, Dolby Pro Logic, and DTS.
1
Turn on the receiver.
1
2
2
Use the MULTI CONTROL buttons or the FUNCTION
button on the remote control, or the INPUT
SELECTOR dial on the front panel to select the
component (DVD/LD etc.) you want to listen to/
watch.
You can only use this remote to control the component if it's made
by POINEER. For all other makers you need to setup the remote
specifically to control your component (See p. 50).
3
6
Choose a 2surround/dts mode by pressing
ADVANCED THEATER or STANDARD.
(For more see "Sound Modes" p. 36-37.)
2
4
Press SIGNAL SELECT on the remote control or
4
SIGNAL SELECT on the front panel to select the input
signal corresponding to the source component (To
select DIGITAL).
3
(See "Switching ANALOG/DIGITAL signal input" on p. 40.)
5
Play a source (for example, a DVD player).
6
Adjust the volume by using the MASTER VOLUME
buttons on the remote control or the MASTER
VOLUME on the front panel.
2
We recommend using different modes for different types of
DTS material. For watching movies, the ADVANCED THEATER
setting should provide the best results. For listening to music,
the STANDARD, DIRECT, STEREO, or DSP modes should serve
the listener best.
6
Basic Playback
39