Pioneer VSX-D498 Operating Instructions Manual page 16

Audio/video multi-channel receiver
Table of Contents

Advertisement

Preparations
SPEAKER setting mode
Establishes the size and configuration of the speaker system you have connected.
In the display, "F", "C", and "S" refer to front, center, and surround speakers respectively. Speaker size is denoted as
"L" for large speakers, "S" for small speakers, and "
memo
If the cone size of your speaker is larger than 5 inches (12 cm), please set to Large.
SOURCE
SELECT
CHANNEL
CD
STANDBY/ON
STATION
TV FUNC.
TV VOL.
TAPE
BAND
FREQ.
DIRECT
TUNER
MPX
CLASS
.ACCESS
DVD
1
2
3
LD
4
5
6
TV
TEST TONE
CONTROL
7
8
9
SURROUND
ATT.
CD DISC
0
FUNCTION
DSP MODE
MUTING
CHANNEL
LEVEL
SELECT
MASTER
RECEIVER
STANDBY/ON
EFFECT
VOLUME
AV MULTI-CHANNEL RECEIVER
Î
REMOTE CONTROL UNIT
SIGNAL
SELECT
ANALOG
SIGNAL
SELECT
ANALOG
SIGNAL
SELECT
ANALOG
* Press # to advance to the next
setting, and press @ to return
to previous setting.
16
<ARB7192>
" (asterisk) if no speaker is connected.
1
Press % or fi to set the front speaker.
Front speaker (initial setting is "L (Large)")
• Select "FL" if your speakers will reproduce bass frequencies effectively or
if you did not connect a sub woofer.
• Select "FS" to send bass frequencies to the sub woofer. (The center and
surround speakers cannot be set to Large if the front speakers are set to
@,#
Small. In this case, all bass frequencies are sent to the sub woofer.)
%,fi
2
Press % or fi to set the center speaker.
Center speaker (initial setting is "L (Large)")
• Select "CL" if your speaker will reproduce bass frequencies effectively.
• Select "CS" to send bass frequencies to the other speakers or sub woofer.
• Select "C
center channel is output from the front speakers.
3
Press % or fi to set the surround speaker.
Surround speaker (initial setting is "L (Large)")
• Select "SL" if your speakers will reproduce bass frequencies effectively.
• Select "SS" to send bass frequencies to the other speakers or sub woofer.
A
SP
• Select "S
sound of the surround channels is output from the front and center
dB
speakers.
SP
A
dB
SP
A
dB
" if you did not connect a center speaker. In this case, the
" if you did not connect surround speakers. In this case, the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents