Direct Tuning - Pioneer VSX-D498 Operating Instructions Manual

Direct Tuning

The following steps show you how to tune directly to a specific frequency using the remote control.
SOURCE
SELECT
CHANNEL
CD STANDBY/ON STATION
TV FUNC. TV VOL.
TAPE BAND FREQ.
2
DIRECT
TUNER MPX CLASS .ACCESS
DVD
1 2
LD
4 5
TV
TEST TONE
CONTROL
7 8
SURROUND ATT. CD DISC
0
1
FUNCTION DSP MODE MUTING
CHANNEL
SELECT LEVEL
RECEIVER MASTER
STANDBY/ON EFFECT VOLUME
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
1
Press FUNCTION repeatedly on the remote or FM/AM on
the front panel to select the tuner. Press TUNER to set
the remote to the tuner operation mode.
The station you were previously tuned to is received automatically.
3
3
2
Press TV FUNC.BAND to select the band (FM or AM).
6
4
Each press switches the band: FM j
9
3
Press DIRECT ACCESS to activate the direct tuning mode.
The cursor blinks in the display on the front panel.
Î
SIGNAL
SELECT
ANALOG
4
Use the number buttons to enter the frequency of the
station you want.
Example:
To tune station 106.00 (FM), press: 1 = ` = 6 = ` = `
SIGNAL
SELECT
ANALOG
To cancel before inputting the frequency
Press DIRECT ACCESS, and enter the frequency again.
Tuner Operations
AM
SP A
dB
A
SP
dB
33
<ARB7192>