Setting Up The Remote Control - Pioneer VSX-D309 Operating Instructions Manual

Preparations

Setting Up the Remote Control

In addition to controlling the receiver, the supplied remote control can operate your other components
(DVD, MD, VCR, TV, LD, CD, etc.). If your component(s) are listed in the "Preset Code List" on page 43,
simply recall the corresponding preset code.
Recalling preset codes
The following steps show you how to recall preset codes for each MULTI CONTROL button. Once the preset
code is assigned, pressing the button will automatically set the remote to operate the respective component.
• Refer to "Preset Code List" on page 43 for the components and manufacturers available.
memo
• Refer to "Controlling the Rest of Your System" on pages 36 to 40 for detailed explanations
on how to operate your other components.
MULTI CONTROL
DVD/LD TV/SAT VCR/DVR
CD-R/
RECEIVER TUNER TV CONT
TAPE/MD
1
2
DSP MODE MIDNIGHT 5.1CH
1 2 3
CHANNEL TEST SIGNAL
ATT
SELECT TONE SELECT
5 6 7
CHANNEL
LEVEL EFFECT
‡
9 0
10
CH
FUNC
TV CONTROL
VOL
FQ
ST ST
ENTER
MENU
FQ
SOURCE CLASS MPX
7 8
D.ACCESS CHANNEL
1 ¡ 4
LOUDNESS FUNCTION MUTING
FL REMOTE
MASTER
RECEIVER
DIMMER SETUP VOLUME
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
20
1 Press REMOTE SET UP and 1 at the same time
to select the preset mode.
Î
LED
CD
2
The LED on the remote control starts to blink.
To cancel the preset mode at any time
4
3
Press REMOTE SET UP.
8
ENTER
2 Press the MULTI CONTROL button for the
DISC
component you want to control.
VOL
2
Each button can be set to control one of the following components
TOP
DVD/LD
MENU
TV/SAT
BAND
3
VCR/DVR
¢
CD
CD-R/TAPE/MD
1,4
TV/CONT
The LED lights steadily and the first manufacturer (and
preset code(s)) appear in the display.
If no commands are entered the receiver automatically exits
the preset code mode after 20 seconds.
3 Press % or fi repeatedly to display the name of
the component's manufacturer.
If necessary, press @ or # to see if an alternative code from
the same manufacturer is available.
A list of all available preset codes is provided on page 43.
If no commands are entered the receiver automatically exits
the preset code mode after 20 seconds.
dB
: DVD or LD player
: TV or Satellite tuner
: VCR or Digital Video Recorder
: CD player
: CD Recorder or Tape deck or MD player
: TV or Cable TV tuner
dB
dB
dB
dB
dB
dB