Haier X220P User Manual page 30

OK. If the screen does not jump out of the dialogue window and no need asked to restart
the laptop, the device driver installation is completed.
4, restart the laptop, the device driver installation is completed.
Wireless LAN driver installation
1. Open the CD-ROM drive and see a folder for Wlan, double-click access to the laptop
on the basis for models with wireless card driver selection.
2. In the corresponding models of wireless card driver .double-click the Setup.exe file,
start the driver installation; please follow the prompts to complete the installation
3 after the closure of the installation dialog box, at this time if the dialogue window
jumped out from the screen is asked to restart the laptop to complete the settings, click
OK. If the screen does not jump out of the dialogue window and no need asked to restart
the laptop, the device driver installation is completed.
4. After restarting the laptop, the device driver installation is completed.
(Note: only part of drive type for wireless network in the CD-ROM, these drives listed
models does not match the drive, then please do not install)
■ ■ ■ ■ ■ ■ ■ ■
If you have selected driver installed, then during the installation process, the program
will prompt you that the driver have been installed and please compare these driver
versions. You'd better use a newer version.
■ ■ ■ ■ ■ ■ ■ ■
Pictures show the contents are for reference only in this chapter, and you find they
probably will have little difference with computer shows, please make the actual as
standard.
30 of 35
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
Copy Right Reserved