Table of Contents
Advertisement
the battery, it will be fully charged.
2、 Disconnect the AC adapter, open running system for battery power .
3、 Fully discharged, until the emergence of power is less than warning power.
4、 Reconnect AC adapter, and once again fully charge battery pack.
5、 Repeat implementation of the above steps until the battery full and discharged
3times.
6 、 Do not charging over time and be sure of charging full and releasing
completely
7、 If there is socket ,please make full use of AC power and remove the battery.
■
■
■
■
■
■
■
■
Make executive of calibration process. Please plug out power if no using laptops.
If you do not use computer, please remove the battery pack.
■
■
■
■
■
■
■
■
Do not place the battery pack below 0 degrees Celsius or above 50 degrees Celsius, the
temperature anomalies will affect battery performance. Do not let battery contact point
short-circuit; otherwise will seriously affect the life of the battery or even damage. Do not
drop, impact battery. Do not place it near heat source or put battery pack into fire to avoid
dangerous explosion. Please follow the right way to deal with end-of-life or unworkerable
battery packs.
■
■
■
■
■
■
■
■
Battery life and charging times are limited, when you find the rechargeable battery
pack power is sharply declined in usage, please run the battery calibration flow. If
the battery pack can not be upgraded after calibration battery life, it is possible that
your battery life will end, please replace new battery.
4.3 Power management
The reasonable use of power management will reduce power consumption.
Setting Power management model
Start> control panel>power option
20 of 35
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Copy Right Reserved
Advertisement
Table of Contents
