Fine Speaker Distance - Pioneer VSX-818V-K Operating Instructions Manual

The System Setup menu
When it sounds like both tones are the same
volume, press ENTER to confirm and continue
to the next channel.
2a.Fine Channel Level
L + 0.0dB
R [ 0.0dB ]
C +1.0dB
LS [ –3.0dB ]
RS [ +10.0dB ]
SW [ –1.5dB ]
• For comparison purposes, the reference
speaker will change depending on which
speaker you select.
• If you want to go back and adjust a
channel, simply use
3 When you're finished, press RETURN.
You return to the Manual MCACC setup menu.

Fine Speaker Distance

• Default setting: 3.0 m (all channels)
For proper sound depth and separation with
your system, it is necessary to add a slight bit
of delay to some speakers so that all sounds
will arrive at the listening position at the same
time. The following setting can help you make
detailed adjustments that you may not achieve
using the Manual speaker setup on page 42.
1 Select 'Fine SP Distance' from the
Manual MCACC setup menu.
The volume increases to the reference level.
2.Manual MCACC
a.Fine Ch Level
b.Fine SP Distance
c.EQ AUTO Setting
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check
(Reference)
:Finish
to select it.
:Return
2 Adjust the distance of the left channel
from the listening position.
2b.Fine SP Distance
L ( R e f e r e n c e )
3.0 m
ENTER:Next
After pressing ENTER, test tones will be
output.
3 Select each channel in turn and adjust
the distance as necessary.
Use to adjust the delay of the speaker
you selected to match the reference speaker.
The delay is measured in terms of speaker
distance from 0.1 m to 9.0 m.
2b.Fine SP Distance
L 3.0 m ( Reference )
R [ 1.8 m ]
C 3.0 m
LS [ 1.3 m ]
RS [ 1.2 m ]
SW [ 2.4 m ]
Listen to the reference speaker and use it to
measure the target channel. From the
listening position, face the two speakers with
your arms outstretched pointing at each
speaker. Try to make the two tones sound as if
they are arriving simultaneously at a position
slightly in front of you and between your arm
span.
When it sounds like the delay settings are
matched up, press ENTER to confirm and
continue to the next channel.
• For comparison purposes, the reference
speaker will change depending on which
speaker you select.
:Cancel
:Finish
06
39
En