Futurecom MOBEXCOM DVRS User Manual page 11

Functions Disabled in LOCAL and SYSTEM Repeat Modes
There are several control unit button and knob functions, which are disabled in the LOCAL and SYSTEM repeat
modes. These are Scan activation, Mode selection, Zone selection, Home channel operation and Mobile channel
selection.
A standard audible error signal "bop" as well as an error message is displayed
VR ACTIVE' or 'RSYS VR ACTIVE' if any of the above functions are attempted in the
Other Button and Knob Functions
The available Repeater functions are:
•
'Monitor'
•
'H/C'
•
'Call'
•
'Opt'
All other buttons and knobs function as programmed in the standard mobile radio. Please refer to the mobile radio's
documentation for details of operation.
Futurecom Systems Group Inc.8A083X03_700_Rev2_5.DOC Rev. Preliminary
NOTE
LOCAL or SYSTEM repeat modes.
- unmutes speaker audio when Mobile or Repeater RF carrier is present.
- changes Repeat mode of operation.
- sends call signal via Mobile transmission (SYSTEM and MOBILE mode only).
- dims alphanumeric display.
Vehicular Repeater System
'RLOC
Page 11