Lcd Display; Controls - Midland GXT-400 Owner's Manual

Model GXT-400

LCD DISPLAY

1
2
3
4
5

CONTROLS

11
12
15
16
17
Page 5
1. LOW BATTERY ICON – Indicates the
battery level is low.
2. TRANSMIT (TX) ICON – Indicates the
unit is transmitting a signal.
6
3. VOX – Display during VOX Mode.
7
4. CHANNEL NUMBER – Changes from
1~22 on GMRS/FRS band and 1~10
on WX band.
8
5. RECEIVE (RX) ICON – Indicates unit
is receiving a transmission.
9
6. KEY LOCK ICON – Indicates KEY
LOCK mode.
10
7. WX BAND ICON – Indicates when the
unit is in WX Band mode.
8. VIBRATE-ALERT ICON – Indicates
when the Vibrate-Alert feature is on.
9. CTCSS CODE – Changes from oF~38
as selected by user .
10. TRANSMIT (TX) POWER ICON –
Indicates TX Power setting.
11. POWER/VOLUME KNOB – Turn clock-
wise to turn the Power On and increase
the volume level. Turn counter-clockwise
to decrease the volume level and turn
the Power Off.
18
12. PTT Button – Press and hold to transmit
voice communication.
13. UP and DOWN
adjustments in MENU mode.
14. MENU Button – Press to access Menu
mode. Press and hold to go to WX Band
20
Receiver mode .
15. CALL/LOCK Button – Press to send a
CALL tone signal. Press and hold to set
14
KEYLOCK On/Off.
16. MIC – Built-in microphone.
19
17. SPEAKER – Built-in speaker.
18. ANTENNA.
19. MONITOR/SCAN Button – Press to
enter SCAN mode. Press and hold to
13
enter MONITOR mode
20. EXTERNAL SPEAKER/MIC JACK.
Button – Make
www.midlandradio.com
®