Midland GXT-400 Owner's Manual page 10

Model GXT-400
CTCSS SUB-TONE SETTING :
Your GXT-400 has 38 CTCSS codes available. The selected CTCSS
code may be different for each channel. To select a CTCSS code for
the current channel press the MENU [14] button twice, and then the
[13] buttons to select one of the 22 channels. To confirm the
/
selection, press the PTT [12] button or wait for 5 seconds roughly
Note : Selecting a CTCSS code of "oF" will disable the the CTCSS
feature. To communicate between two GXT-400 radios , both the
channel and CTCSS code selections must be the same.
TRANSMIT (TX) POWER SELECTION :
Your GXT-400 has 3 transmit power levels. To select the power level
on channels 1~7 and 15~22, press the MENU [14] button thee times,
a "Pr" icon will appear on the display. Then press the
to select among the 3 TRANSMIT POWER [10] icon (H/M/L). To con-
firm, press the PTT [12] button or wait for 5 seconds roughly.
Note : There is no transmit power selection on Channel 8~14.
VOX (Hands-free Transmission) FUNCTION:
Your GXT-400 has 3 VOX level selection (oF/Lo/Hi).
To activate the VOX function, press the MENU [14] button four times.
The display shows "VOX" blinking while on the right of the
NEL NUMBER [4] display, an "oF" icon appears. Select "Lo" or "Hi" by
pressing the
seconds for confirmation. The VOX functionwill be more sensitive on
the "Hi" setting than in the "Lo" setting.
To deactivate the VOX function, press the MENU [14] button four
times. The display shows "VOX" blinking while on the right of the
CHANNEL NUMBER [4] display, an "on" icon appears. Select "oF" by
pressing the
seconds for confirmation.
Page 10
[13] buttons and push the PTT[12] key, or wait for 5
/
[13] buttons and push the PTT[12] key, or wait for 5
/
[13] buttons
/
www.midlandradio.com
®
CHAN-