Using The Flashlight; External Speaker/Microphone Jack; Usb Jack - Midland XT511A User Manual

2-way radio with emergency crank
Table of Contents

Advertisement

Model XT511A Series

USING THE FLASHLIGHT

Your radio has a built-in FLASHLIGHT.
To turn the FLASHLIGHT on, set the LIGHT switch to ON.
To turn the FLASHLIGHT off, set the LIGHT switch to OFF.

EXTERNAL SPEAKER/MICROPHONE JACK

Your radio can be used with an optional external speaker/
microphone or headset, freeing your hands for other tasks. You can
also use the HAND MIC thru the SPEAKER/MICROPHONE JACK.
To use an optional speaker/microphone or headset:
Open the SPEAKER/MIC Jack Rubber Cap on the side of the
radio.
Insert the plug(s) into the SPK/MIC jacks.
Place the earbud into your ear, and adjust the mic into your desired
position.
Note: When the HAND MIC is connected, all audio will play through
the HAND MIC because it is a speaker mic. This is normal
operation.

USB JACK

Your radio can be used to charge a mobile phone by the DYNAMO
CRANK, AC, or DC Adapter thru the USB Jack.
Open the USB Jack Rubber Cap on the side of the radio.
Attach a USB Charging Cable (not included) to the mobile phone.
Connect the other end of the USB Charging Cable to the USB
Jack of the XT511A.
Recharge the mobile phone battery by turning rapidly the
DYNAMO CRANK, or by attaching the AC or DC Adapter in the
Charging Jack.
Note: Charging a mobile phone thru the USB
Jack is intended for emergency purpose
only. It is not intended for recharging a
fully discharged battery.
Page 20
USB JACK
EXTERNAL SPK/MIC JACK
CHARGING JACK
midlandusa.com

Advertisement

Table of Contents
loading

Table of Contents