Engine Oil Life Reset - Dodge Durango SRT 2018 Owner's Manual

146 GETTING TO KNOW YOUR INSTRUMENT PANEL
These pop up messages fall into several categories:
• Five Second Stored Messages
When the appropriate conditions occur, this type of mes-
sage takes control of the main display area for five seconds
and then returns to the previous screen. Most of the
messages of this type are then stored (as long as the
condition that activated it remains active) and can be
reviewed from the "Messages" main menu item. Examples
of this message type are "Right Front Turn Signal Lamp
Out" and "Low Tire Pressure."
• Unstored Messages
This message type is displayed indefinitely or until the
condition that activated the message is cleared. Examples
of this message type are "Turn Signal On" (if a turn signal
is left on) and "Lights On" (if driver leaves the vehicle).
• Unstored Messages Until RUN
These messages deal primarily with the Remote Start
feature. This message type is displayed until the ignition is
in the RUN state. Examples of this message type are
"Remote Start Canceled - Door Ajar" and "Press Brake
Pedal and Push Button to Start."
• Five Second Unstored Messages
When the appropriate conditions occur, this type of mes-
sage takes control of the main display area for five seconds
and then returns to the previous screen. An example of this
message type is "Automatic High Beams On."

Engine Oil Life Reset

Oil Change Required
Your vehicle is equipped with an engine oil change indi-
cator system. The "Oil Change Required" message will
display in the instrument cluster display for five seconds
after a single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil change indi-
cator system is duty cycle based, which means the engine
oil change interval may fluctuate, dependent upon your
personal driving style.
Unless reset, this message will continue to display each
time you place the ignition in the ON/RUN position. To
turn off the message temporarily, push and release the OK
or arrow buttons. To reset the oil change indicator system
(after performing the scheduled maintenance), refer to the
following procedure.