Rules For Safe Operation - Chapin ProSeries 61800 Use And Care Manual

NOTE: The tank and hose may have residual water in it due to quality
testing performed on the sprayer.
• Lawn & Garden • Tree & Orchard • Pesticide Use • Agriculture Use
WARNING: IMPROPER USE OR FAILURE TO FOLLOW
INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR
INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ
AND FOLLOW ALL INSTRUCTIONS BEFORE USING.
READ ME FIRST
Your Chapin sprayer is designed to provide years of dependable use for a variety of needs.
Manufactured from durable high-density polyethylene, your Chapin sprayer will operate
at optimum efficiency for years to come by performing easy maintenance after each use.

RULES FOR SAFE OPERATION

Before assembling and operating your Chapin sprayer, read all instructions thoroughly.
When working with equipment under pressure, safety precautions must always be
carefully observed, including the following:
•
NEVER SPRAY FLAMMABLE MATERIALS OR PRESSURE AND GAS PRODUCING
CHEMICALS SUCH AS SODIUM HYDROXIDE.
• ALWAYS READ CHEMICAL LABEL BEFORE FILLING SPRAYER AS SOME
CHEMICALS MAY BE HAZARDOUS WHEN USED WITH THIS SPRAYER.
•
Do not leave a pressurized sprayer in the hot sun or anywhere near a heat source. Heat
can produce pressure to build up causing sprayer to ignite or explode resulting in injury
or death.
•
Always wear goggles, gloves, a long-sleeve shirt, long pants, and full foot protection
when spraying.
• NEVER pressurize sprayer by any means other than the original pump. Over
pressurizing can cause sprayer to explode resulting in injury or death.
•
Do not attempt to modify or repair this product except with original manufacturer's
parts.
•
PRE-USE CHECK: Check tightness of hose nut to be sure hose is securely attached to
the shut-off assembly. Insure hose is securely attached to the tank by tightening hose
clamp if necessary. Insure that all nozzle and wand connections are tight.
1E
REPLACEMENT PARTS ORDER INFORMATION
Compression Spring (under cap) 6-8118
Sealing Spring (under cap) 6-8119
O-ring 6-8102
O-ring 6-8100
Compression
Spring 6-8118
Sealing Spring 6-8119
O-ring 6-8114
Plate Valve 6-8117
O-ring 6-8115
O-ring 6-8116
Collar 6-8113
Nozzle
6-8093
Retaining Nut 6-8094
Nozzle Base
Nozzle gasket 6-8129
Elbow 6-8099
O-ring 6-8100
Wand 6-8101
Retaining Nut 6-8094
O-ring 6-8127
Shut-off Handle 6-8103
Shut-off Filter 6-8128
O-ring 6-8108
Retaining Nut 6-8111
Hose 6-8105
Clamp 6-8106
Straps 6-8137
10E