Charging The Pt900 Transmitter And Tablet; Installing The Pt900 Tablet App - GE TransPort Quick Start Manual

®
TransPort PT900 Quick-Start Guide
5.0

Charging the PT900 Transmitter and Tablet

Before proceeding, make sure that both the PT900 Transmitter and the Tablet are
fully charged. The AC power adapter is shipped in the carry case. If either the
transmitter or the tablet cannot be powered On after charging, contact your GE
representative for assistance.
To charge the transmitter, use the AC power adapter provided. Charging will occur
whether the PT900 is On or Off , and the battery LEDs indicate the battery charging
status. Charging a fully-depleted battery pack to full charge may take up to 3 hours.
6.0

Installing the PT900 Tablet APP

This section describes how to install the PT900 APP on your Android tablet.
6.1 Obtaining the PT900 Android APP
Obtain the PT900 APP from one of the following locations:
•
Google Play Store (free download):
Set up a free account in Google Play Store. Search for the TransPort
PT900 APP and install it on your tablet.
•
QR Code or GE Website (free download):
Either Scan the QR Code in Figure 2 below or download the latest version
of the APP directly from the GE website at the following URL:
https://www.gemeasurement.com/flow-measurement-control/ultrasonic-
liquid/transport-pt900-portable-ultrasonic-flow-meter-liquids
or
www.gemeasurement.com/transport.
•
The SD card supplied with your PT900 system:
Plug the SD card directly into your tablet, and select the APK file from the
SD folder.
Note:
Check the GE website for the latest version.
6
Figure 2: QR Code