Contact Addresses; Switching Output - Kaco Powador-proLOG Operating Instructions Manual

Section 8 · Me nu De scripti on
Database Synchronization Settings: Yes/No
When you use the "Powador-web" service, you have the
option of having all alarm messages sent to both the receiving
address and the portal. This means that the fault messages
are also accessible in alarm management.
I M P O RTA N T
Your changes are not applied until you press the "Save"
button.
4. SMS (Text message)
This section contains settings for sending SMS messages (text
messages). Enter the numbers of the SMS server.
Designation
SMS server prefix(es), separated by a semi-colon.
SMSC Telephone number (analog)
Phone number(s) of the server that is used for sending SMS
messages.
SMSC Telephone number (ISDN)
Phone number(s) of the server that is used for sending SMS
messages.
Operating Instructions Powador-proLOG_EN

8.5.2 Contact Addresses

You can define up to four contacts in the "Contact addresses"
section. These contacts are in addition to the standard contact
and are alerted in the event of a fault. Fill in the fields in the
same way you did for the standard contact address.
I M P O RTA N T
Your changes are not applied until you press the "Save"
button.

8.5.3 Switching Output

The settings in this section are used to configure the digital
output. You can choose between inactive, alarm output and
counter output.
When configured as a counter output for connection of a dis-
play, you need to enter a pulse constant. The pulse constant
indicates how many pulses are emitted by the Powador-pro-
LOG at D0 for one kWh of energy produced.
When configured as an alarm output for connection of an
alarm, you can activate the various alarms in the "Set digital
output" section in the lower part of the screen. You can clear
the alarms in "Admin Monitoring >> Plant Messages",
"Inverters" and "Formulas" .
I M P O RTA N T
Your changes are not applied until you press the "Save"
button.
Page 39 39