The System And The Other Setup; Making Receiver Settings From The System Setup; Menu; Manual Speaker Setup - Pioneer VSX-LX52 Operating Instructions Manual

11

The system and the other setup

Chapter 11:
The system and the other setup
Making receiver settings from the
System Setup menu
The following section describes how to change the
speaker-related settings manually and make various
other settings (input selection, OSD language selection,
etc.).
RECEIVER SOURCE
DVD BD DVR HDMI
TV CD CD-R VIDEO
iPod USB TUNER INPUT SELECT
1 Switch on the receiver and your TV.
Use the  RECEIVER button to switch on.
• If headphones are connected to the receiver,
disconnect them.
2 Press RECEIVER
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
• Press HOME MENU at any time to exit the HOME

MENU.

3 Select 'System Setup' from the HOME MENU, then
press ENTER.
4 Select the setting you want to adjust.
Note
1 Make sure not to switch off the power when using the System Setup menu.
2 You can't use the HOME MENU when either the iPod/USB input function is selected or the headphones are connected. When you set ZONE
2, ZONE 3 or ZONE 2&3 to ON (page 63), you can't use the HOME MENU.
84
En
AUDIO VIDEO
TV/DTV
PARAMETER PARAMETER
LIST TUNE TOOLS
AUDIO
TOP MENU T.EDIT
BAND GUIDE
ENTER
PRESET PRESET
REMOTE
PTY SETUP
RETURN
SEARCH
HOME
ZONE 2
TUNE
MENU
iPod CTRL
1
, then press HOME MENU.
HOME MENU
A/V RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
Exit Return
4.System Setup
A/V RECEIVER
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
Exit Return
• Manual SP Setup – Sets the type of connection used
for surround back terminals and the size, number
distance and overall balance of the connected
speakers (see Manual speaker setup below).
• Input Setup – Specifies what you've connected to
the digital, HDMI and component video inputs (see
The Input Setup menu on page 40).
• OSD Language – The GUI screen's display language
can be changed (see Changing the OSD display
MPX PQLS
language (OSD Language) on page 38).
INFO CH
DISP
• Other Setup – Makes customized settings to reflect
TV CTRL RECEIVER
how you are using the receiver (see The Other Setup
menu on page 88).
ZONE 3
MAIN

Manual speaker setup

This receiver allows you to make detailed settings to
optimize the surround sound performance. You only need
to make these settings once (unless you change the
2
placement of your current speaker system or add new
speakers).
These settings are designed to customize your system,
but if you're satisfied with the settings made in
Automatically setting up for surround sound (Auto
MCACC) on page 39, it isn't necessary to make all of
these settings.
CAUTION
• The test tones used in the Manual SP Setup are
output at high volume.
1 Select 'Manual SP Setup', then press ENTER.
See Making receiver settings from the System Setup menu
above if you're not already at this screen.
4.System Setup
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
Exit
2 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
4a.Manual SP Setup
A/V RECEIVER
1. Surr Back System
2. Speaker Setting
3. Channel Level
4. Speaker Distance
5. X-Curve
6. THX Audio Setting
Return Exit
A/V RECEIVER
Return