Input Function Default And Possible Settings - Pioneer VSX-LX52 Operating Instructions Manual

Basic Setup
1 Switch on the receiver and your TV.
Use  RECEIVER to switch on.
2 Press RECEIVER on the remote control, then press
HOME MENU.
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
3 Select 'System Setup' from the HOME MENU.
4 Select 'Input Setup' from the System Setup menu.
4.SystemSetup
A/V RECEIVER
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
Exit Return
5 Select the input function that you want to set up.
The default names correspond with the names next to the
terminals on the rear panel (such as DVD or VIDEO)
which, in turn, correspond with the names on the remote
control.
6 Select the input(s) to which you've connected your
component.
For example, if your DVD player only has an optical
output, you will need to change the DVD input function's
Digital In setting from COAX-1 (default) to the optical
input you've connected it to. The numbering (OPT-1 to 3)
corresponds with the numbers beside the inputs on the
back of the receiver.
• If your component is connected via a component
video cable to an input terminal other than the
default, you must tell the receiver which input
terminal your component is connected to, or else you
may see the S-Video or composite video signals
instead of the component video signals.
7 When you're finished, proceed to the settings for
other inputs.
There are three optional settings in addition to the
assignment of the input jacks:
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
• Input Skip – When set to ON, that input is skipped
when selecting the input using INPUT SELECT. (DVD
and other inputs can be still be selected directly with
the input function buttons.)
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in Setting the Video options
on page 61), you must connect your TV to this receiver using the same type of video cable as you used to connect your video component.
4b.Input Setup
A/V RECEIVER
INPUT : DVD
Input Name : Rename
Input Skip : OFF
Digital In : COAX-1
HDMI Input : - - -
Component In : Comp-1
12V Trigger1 : OFF
12V Trigger2 : OFF
Exit Finish
1
• 12V Trigger1/2 – After connecting a component to
one of the 12 volt triggers (see Switching components
on and off using the 12 volt trigger on page 34), select
MAIN, ZONE 2, ZONE 3 or OFF for the corresponding
trigger setting to switch it on automatically along
with the (main or sub) zone specified.
4b.Input Setup
A/V RECEIVER
INPUT :
Input Name :
Input Skip :
Digital In :
HDMI Input :
Component In :
12V Trigger1 :
12V Trigger2 :
Exit
8 When you're finished, press RETURN.
You will return to the System Setup menu.

Input function default and possible settings

The terminals on the receiver generally correspond to the
name of one of the input functions. If you have connected
components to this receiver differently from (or in
addition to) the defaults below, see The Input Setup menu
on page 40 to tell the receiver how you've connected up.
The dots () indicate possible assignments.
Input
function
Digital
DVD COAX-1
BD
TV/SAT OPT-1
DVR OPT-2
VIDEO OPT-3
HDMI 1
HDMI 2
HDMI 3
HDMI 4
iPod/USB
CD COAX-2

CD-R/TAPE
TUNER
MULTI CH IN
a.With KURO LINK set to ON, assignments cannot be made (see
KURO LINK on page 57).
b.This assignment is fixed and cannot be changed.
DVD
Rename
OFF
COAX-1
- - -
Comp-1
OFF
OFF
Finish
Input Terminals
HDMI Component
a

IN 1
b
(
BD)
a
 
a

IN 2
a
 
(
HDMI-1)
(HDMI-2)
(
HDMI-3)
b
(
HDMI-4)
a

04
41
En