Controlling The Rest Of Your System; Setting The Remote To Control Other; Components; Selecting Preset Codes Directly - Pioneer VSX-D514 Operating Instructions Manual

09

Controlling the rest of your system

Chapter 9:
Controlling the rest of your
system
Setting the remote to control
other components
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component's manufacturer preset code
(starting on page 66) to one of the MULTI
CONTROL buttons on the remote control.
The buttons can be set to control the following

components:

Button
DVD/LD:
TV/SAT:
DVR/VCR:
CD:
CD-R/TAPE:
TV CONT:
TUNER:
• VSX-D814 only – If you can't find a preset
code that matches the component you
want to control, you can still teach the
remote individual commands from
another remote control (page 61).
• The remote control will exit an operation
after 1 minute of inactivity.
60
En
Controllable Components
DVD or LD player
TV or Satellite tuner
Digital Video Recorder or VCR
CD player
CD Recorder, Tape deck
or MD player
TV or Cable TV tuner
FM/AM tuner
Selecting preset codes
directly
MULTI CONTROL
DVD/LD TV / SAT
C D CD-R/TAPE
MASTER
VOLUME
TUNE
ST
ENTER
TUNE
1 While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
DVR/VCR TV CONT
TUNER RECEIVER
ST