Microsd Card Settings; View Memory In The Microsd Card; Format The Microsd Card; Microsd Card - Motorola Photon Q User Manual

microSD Card Settings

View Memory in the microSD Card

►
With the microSD card inserted, touch Apps
and available memory space will be displayed.)

Format the microSD Card

Note: Do not remove your memory card while your phone is using it or writing files on it.
1. Before you remove or format your memory card you need to unmount it. Touch Apps
> Settings > Storage > Unmount SD card.
2. To format your memory card, touch Format SD card.
Note: The formatting procedure erases all the data on the microSD card, after which the files
CANNOT be retrieved. To prevent the loss of important data, please check the contents
before you format the card.

microSD Card

1. Touch Apps
2. Touch a file or folder to open.

Connect Your Phone to Your Computer

You can connect your phone to a computer with a USB cable.
Note: The first time you use a USB connection, your computer may indicate that drivers are
being installed. Follow any prompts you see to complete the installation. This may take a
few minutes.
Note: You also may see MotoHelper installation for using Motorola Media Link, an easy way to
transfer files to your phone.
1. Connect a Motorola micro USB data cable from your phone's micro USB port to a USB
port on your computer. Your phone should show
Note: Make sure to connect the phone to a high power USB port. Typically, these are located
directly on your computer.
2. On your phone, flick down the status bar and touch the USB notification to see the USB
connection options.
microSD Card
06/06/2012
> Files > SD card.
FCC
49
> Settings > Storage. (The used
in the status bar.