The System Setup Menu; Making Receiver Settings From The System Setup; Menu; Automatic Mcacc (Expert) - Pioneer VSX-82TXS Operating Instructions Manual

The System Setup menu

07
Chapter 7:
The System Setup menu
Making receiver settings from the
System Setup menu
The following section shows you how to make detailed
settings to specify how you're using the receiver (for
example, if you want to set up two speaker systems in
separate rooms), and also explains how to fine-tune
individual speaker system settings to your liking.
RECEIVER INPUT
SELECT
CD TV
DVD SAT
DVR2 CD-R
DVR1 i Pod
SLEEP
1 Switch on the receiver and your TV.
Use the RECEIVER button to switch on.
• If headphones are connected to the receiver,
disconnect them.
2 Press RECEIVER on the remote control, then press
the SETUP button.
An on-screen display (OSD) appears on your TV. Use the
buttons and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
• Press SETUP at any time to exit the System Setup

menu.

3 Select the setting you want to adjust.
• Auto MCACC – See Automatically setting up for
surround sound (MCACC) on page 7 for a quick and
effective automatic surround setup. See Automatic
MCACC (Expert) below for a more detailed setup.
Note
1 Make sure not to switch off the power when using the System Setup menu.
2 • Note that when editing items in the Manual MCACC menu, you will need to first specify the MCACC preset you want to adjust by pressing MCACC
before pressing SETUP .
• You can't use the System Setup menu when the iPod or XM Radio input source is selected (in either the main or sub room).
3 These are stored in memory and referred to as MEMORY1–6 (or M1–6) until you rename them in Data Management on page 42.
4 You may also want to have separate calibration settings for the same listening position, depending on how you're using your system.
5 Except in cases where you are only adjusting one parameter (i.e. channel level) from the Option setup screen (step 3).
34
En
SYSTEM OFF
D.ACCESS CLASS
+10
SOURCE
ENTER
AV PARAMETER CH LEVEL
TOP MENU MENU
TUNE
ST ST
DTV MENU T.EDIT
ENTER
SETUP SETUP RETURN RETURN
TUNE
CATEGORY
BAND
GUIDE
TV CONTROL
VIDEO 2
VIDEO 1 TV CONT
INPUT
TV VOL TV CH VOL
SELECT
XM RADIO ROOM2/3
TUNER RECEIVER
REC
DTV INFO MUTE
VIDEO ANALOG
1
2
System Setup
1.Auto MCACC
2.Surr Back System
3.Manual MCACC
4.Data Management
5.Manual SP Setup
6.Input Setup
7.Other Setup
: Exit
• Surr Back System – Specify how you are using your
surround back speakers (see Surround back speaker
setting on page 36).
• Manual MCACC – Fine tune your speaker settings
and customize the Acoustic Calibration EQ (see
Manual MCACC setup on page 37).
• Data Management – Check your MCACC presets
and manage them through copying, renaming or
deleting (see Data Management on page 42).
• Manual SP Setup – Specify the size, number,
DISC
distance and overall balance of the speakers you've
connected (see Manual speaker setup on page 43).
• Input Setup – Specify what you've connected to the
digital and component video inputs (see The Input
Setup menu on page 63).
• Other Setup – Make customized settings to reflect
how you are using the receiver (see The Other Setup
menu on page 64).

Automatic MCACC (Expert)

If your setup requires more detailed settings than those
provided in Automatically setting up for surround sound
(MCACC) on page 7, you can customize your setup
options below. You can calibrate your system differently
for up to six different MCACC presets
if you have different listening positions depending on the
type of source (for example, watching movies from a sofa,
or playing a video game close to the TV).
Important
• Make sure the microphone/speakers are not moved
during the Auto MCACC Setup.
• Using the Auto MCACC Setup will overwrite any
existing settings for the MCACC preset you select.
• The screen saver will automatically appear after three
minutes of inactivity.
Caution
• The test tones used in the Auto MCACC Setup are
output at high volume.
3
, which are useful
4
5