Using The Sr+ Mode With A Pioneer Plasma; Display - Pioneer VSX-82TXS Operating Instructions Manual

Other connections
Important
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won't be able to control the
receiver using the remote control if you switch the
plasma display off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See The Input
Setup menu on page 63 and SR+ Setup for Pioneer
plasma displays on page 65 for detailed instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
VIDEO
Pioneer plasma
INPUT 1

display

DVD player
DVD/LD
AUDIO IN
STANDBY/ON
PHASE
CONTROL
PHASE MCACC AUTO SURR/
CONTROL POSITION STREAM DIRECT
INPUT
SELECTOR
This receiver
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
VIDEO
INPUT 2
Satellite receiver, etc
SAT
AUDIO IN
VSX-84TXSi
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
DIGITAL PRECISION
PROCESSING
HOME STANDARD ADVANCED
THX SURROUND SURROUND
MASTER
VOLUME
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 65 for more on setting up the receiver.
Important
• The additional SR+ features do not work when the
iPod or XM Radio functions are selected.
SYSTEM OFF
RECEIVER INPUT SOURCE
SELECT
CD TV VIDEO 2
DVD SAT VIDEO 1 TV CONT
DVR2 CD-R XM RADIO ROOM2/3
DVR1 i Pod TUNER RECEIVER
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you've connected the receiver in The Input
Setup menu on page 63.
2 To switch SR+ mode on/off, press RECEIVER , then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
• The automatic volume muting feature is enabled
separately; see SR+ Setup for Pioneer plasma displays
on page 65.
SLEEP VIDEO ANALOG
SEL ATT
SR+ DIMMER S.RETRIEVER
D.ACCESS CLASS
+10
DISC
ENTER
AV PARAMETER CH LEVEL
TOP MENU MENU
TUNE
ST ST
T.EDIT
DTV MENU
ENTER
SETUP RETURN
TUNE
CATEGORY
BAND
GUIDE
08
61
En