Download Print this page

MARTINDALE PSI4000 Instruction Manual page 4

Sequence indicator

Advertisement

4.4 Storage Conditions
The instrument should be kept in warm dry conditions away from
direct sources of heat or sunlight, and in such a manner as to
preserve the working life of the unit. It is strongly advised that the
unit is not kept in a tool box where other tools may damage it.
Specification
PSI4000/PSI4300
Phase Sequence Indicator
PSI4000
clockwise
rotation
Measurement principle: Static induction
Input voltage range:
150V to 1000V AC (phase to earth) (serial no's 9995965-9996166 only)
75V to 1000V AC (phase to earth)
Input frequency range: 45Hz to 65Hz
Temperature & Humidity: Operating: -10°C to 50°C ≤ 80% R.H.
Storage: -20°C to 60°C ≤ 80% R.H.
Altitude: up to 2000m
Power: 4 x 1.5V LR6/AA alkaline batteries.
Battery current consumption: 16mA
Low battery warning: Power LED flashes below 4.6 ± 0.1V DC battery voltage
Auto power off time: Approx 5 minutes
Standby current: 0.5mA
Sensor clip cable length: Approx. 800mm
Minimum conductor diameter: 2.4mm
Maximum conductor diameter: 30mm
Dimensions: 118 x 69 x 38 mm
Weight: 370g approx (batteries included)
Includes: 4 x 1.5V alkaline batteries, soft case & instructions
Safety: Conforms to BS EN61010-1, BS EN 61557-1 & BS EN61557-7
CAT III 1000V, CAT IV 600 V.
Class II Double Insulation
Pollution Degree: 2
EMC: Conforms to BS EN 61326-1
5. WARRANTY AND LIMITATION OF LIABILITY
This Martindale product is warranted to be free from defects in
material and workmanship under normal use and service. The
warranty period is 2 years and begins on the date of receipt by the
end user. This warranty extends only to the original buyer or end-user
customer, and does not apply to fuses, disposable batteries, test
leads or to any product which, in Martindale's opinion, has been
misused, altered, neglected, contaminated, or damaged by accident
or abnormal conditions of operation, handling or storage.
Martindale authorised resellers shall extend this warranty on new and
unused products to end-user customers only but have no authority to
extend a greater or different warranty on behalf of Martindale.
Martindale's warranty obligation is limited, at Martindale's option, to refund
of the purchase price, free of charge repair, or replacement of a defective
product which is returned to Martindale within the warranty period.
This warranty is the buyer's sole and exclusive remedy and is in lieu of
all other warranties, expressed or implied, including but not limited to
any implied warranty of merchantability or fitness for a particular
purpose. Martindale shall not be liable for any special, indirect,
incidental or consequential damages or losses, including loss of data,
arising from any cause or theory.
Since some jurisdictions do not allow limitation of the term of an
implied warranty, or exclusion or limitation of incidental or
consequential damages, the limitations and exclusions of this warranty
may not apply to every buyer. If any part of any provision of this
warranty is held invalid or unenforceable by a court or other decision-
maker of competent jurisdiction, such holding will not affect the validity
or enforceability of any other provision or other part of that provision.
Nothing in this statement reduces your statutory rights.
11
10
Check out what else you can get from Martindale:
G
17th Edition Testers
G
Accessories
PSI4300
G
Calibration Equipment
anti-clockwise
G
Continuity Testers
rotation
G
Electricians' Kits
G
Environmental Products
G
Full Calibration & Repair Service
G
Fuse Finders
G
Digital Clamp Meters
G
Digital Multimeters
G
Labels
G
Microwave Leakage Detectors
G
Motor Maintenance Equipment
G
Multifunction Testers
G
Non-trip Loop Testers
G
Pat Testers & Accessories
G
Phase Rotation Testers
G
Proving Units
G
Socket Testers
G
Thermometers & Probes
G
Test Leads
G
Voltage Indicators
G
Specialist Metrohm Testers (4 & 5kV)
G
Specialist Drummond Testers
Martindale Electric Company Limited
Metrohm House, Imperial Park, Imperial Way,
Watford, Hertfordshire, WD24 4PP, UK
Tel: +44(0)1923 441717 Fax: +44 (0)1923 446900
E-mail:sales@martindale-electric.co.uk
Website: www.martindale-electric.co.uk
© 2012 Martindale Electric Company Ltd.
Registered in England No. 3387451. E. & O.E.
Document Rev2 LITPSI4000/4300

Advertisement

loading

This manual is also suitable for:

Psi4300